--- skippy-0.5.0.orig/debian/changelog +++ skippy-0.5.0/debian/changelog @@ -0,0 +1,6 @@ +skippy (0.5.0-1) unstable; urgency=low + + * Initial Release. + + -- Geoffrey LEE Sun, 22 Aug 2004 12:17:58 +0800 + --- skippy-0.5.0.orig/debian/compat +++ skippy-0.5.0/debian/compat @@ -0,0 +1 @@ +4 --- skippy-0.5.0.orig/debian/conffiles.ex +++ skippy-0.5.0/debian/conffiles.ex @@ -0,0 +1,7 @@ +# +# If you want to use this conffile, remove all comments and put files that +# you want dpkg to process here using their absolute pathnames. +# See the policy manual +# +# for example: +# /etc/skippy/skippy.conf --- skippy-0.5.0.orig/debian/cron.d.ex +++ skippy-0.5.0/debian/cron.d.ex @@ -0,0 +1,4 @@ +# +# Regular cron jobs for the skippy package +# +0 4 * * * root skippy_maintenance --- skippy-0.5.0.orig/debian/dirs +++ skippy-0.5.0/debian/dirs @@ -0,0 +1,2 @@ +usr/bin +usr/sbin --- skippy-0.5.0.orig/debian/emacsen-install.ex +++ skippy-0.5.0/debian/emacsen-install.ex @@ -0,0 +1,45 @@ +#! /bin/sh -e +# /usr/lib/emacsen-common/packages/install/skippy + +# Written by Jim Van Zandt , borrowing heavily +# from the install scripts for gettext by Santiago Vila +# and octave by Dirk Eddelbuettel . + +FLAVOR=$1 +PACKAGE=skippy + +if [ ${FLAVOR} = emacs ]; then exit 0; fi + +echo install/${PACKAGE}: Handling install for emacsen flavor ${FLAVOR} + +#FLAVORTEST=`echo $FLAVOR | cut -c-6` +#if [ ${FLAVORTEST} = xemacs ] ; then +# SITEFLAG="-no-site-file" +#else +# SITEFLAG="--no-site-file" +#fi +FLAGS="${SITEFLAG} -q -batch -l path.el -f batch-byte-compile" + +ELDIR=/usr/share/emacs/site-lisp/${PACKAGE} +ELCDIR=/usr/share/${FLAVOR}/site-lisp/${PACKAGE} + +# Install-info-altdir does not actually exist. +# Maybe somebody will write it. +if test -x /usr/sbin/install-info-altdir; then + echo install/${PACKAGE}: install Info links for ${FLAVOR} + install-info-altdir --quiet --section "" "" --dirname=${FLAVOR} /usr/info/${PACKAGE}.info.gz +fi + +install -m 755 -d ${ELCDIR} +cd ${ELDIR} +FILES=`echo *.el` +cp ${FILES} ${ELCDIR} +cd ${ELCDIR} + +cat << EOF > path.el +(setq load-path (cons "." load-path) byte-compile-warnings nil) +EOF +${FLAVOR} ${FLAGS} ${FILES} +rm -f *.el path.el + +exit 0 --- skippy-0.5.0.orig/debian/emacsen-remove.ex +++ skippy-0.5.0/debian/emacsen-remove.ex @@ -0,0 +1,15 @@ +#!/bin/sh -e +# /usr/lib/emacsen-common/packages/remove/skippy + +FLAVOR=$1 +PACKAGE=skippy + +if [ ${FLAVOR} != emacs ]; then + if test -x /usr/sbin/install-info-altdir; then + echo remove/${PACKAGE}: removing Info links for ${FLAVOR} + install-info-altdir --quiet --remove --dirname=${FLAVOR} /usr/info/skippy.info.gz + fi + + echo remove/${PACKAGE}: purging byte-compiled files for ${FLAVOR} + rm -rf /usr/share/${FLAVOR}/site-lisp/${PACKAGE} +fi --- skippy-0.5.0.orig/debian/emacsen-startup.ex +++ skippy-0.5.0/debian/emacsen-startup.ex @@ -0,0 +1,19 @@ +;; -*-emacs-lisp-*- +;; +;; Emacs startup file for the Debian skippy package +;; +;; Originally contributed by Nils Naumann +;; Modified by Dirk Eddelbuettel +;; Adapted for dh-make by Jim Van Zandt + +;; The skippy package follows the Debian/GNU Linux 'emacsen' policy and +;; byte-compiles its elisp files for each 'emacs flavor' (emacs19, +;; xemacs19, emacs20, xemacs20...). The compiled code is then +;; installed in a subdirectory of the respective site-lisp directory. +;; We have to add this to the load-path: +(let ((package-dir (concat "/usr/share/" + (symbol-name flavor) + "/site-lisp/skippy"))) + (when (file-directory-p package-dir) + (setq load-path (cons package-dir load-path)))) + --- skippy-0.5.0.orig/debian/init.d.ex +++ skippy-0.5.0/debian/init.d.ex @@ -0,0 +1,74 @@ +#! /bin/sh +# +# skeleton example file to build /etc/init.d/ scripts. +# This file should be used to construct scripts for /etc/init.d. +# +# Written by Miquel van Smoorenburg . +# Modified for Debian +# by Ian Murdock . +# +# Version: @(#)skeleton 1.9 26-Feb-2001 miquels@cistron.nl +# + +PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin +DAEMON=/usr/sbin/skippy +NAME=skippy +DESC=skippy + +test -x $DAEMON || exit 0 + +# Include skippy defaults if available +if [ -f /etc/default/skippy ] ; then + . /etc/default/skippy +fi + +set -e + +case "$1" in + start) + echo -n "Starting $DESC: " + start-stop-daemon --start --quiet --pidfile /var/run/$NAME.pid \ + --exec $DAEMON -- $DAEMON_OPTS + echo "$NAME." + ;; + stop) + echo -n "Stopping $DESC: " + start-stop-daemon --stop --quiet --pidfile /var/run/$NAME.pid \ + --exec $DAEMON + echo "$NAME." + ;; + #reload) + # + # If the daemon can reload its config files on the fly + # for example by sending it SIGHUP, do it here. + # + # If the daemon responds to changes in its config file + # directly anyway, make this a do-nothing entry. + # + # echo "Reloading $DESC configuration files." + # start-stop-daemon --stop --signal 1 --quiet --pidfile \ + # /var/run/$NAME.pid --exec $DAEMON + #;; + restart|force-reload) + # + # If the "reload" option is implemented, move the "force-reload" + # option to the "reload" entry above. If not, "force-reload" is + # just the same as "restart". + # + echo -n "Restarting $DESC: " + start-stop-daemon --stop --quiet --pidfile \ + /var/run/$NAME.pid --exec $DAEMON + sleep 1 + start-stop-daemon --start --quiet --pidfile \ + /var/run/$NAME.pid --exec $DAEMON -- $DAEMON_OPTS + echo "$NAME." + ;; + *) + N=/etc/init.d/$NAME + # echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2 + echo "Usage: $N {start|stop|restart|force-reload}" >&2 + exit 1 + ;; +esac + +exit 0 --- skippy-0.5.0.orig/debian/manpage.1.ex +++ skippy-0.5.0/debian/manpage.1.ex @@ -0,0 +1,60 @@ +.\" Hey, EMACS: -*- nroff -*- +.\" First parameter, NAME, should be all caps +.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection +.\" other parameters are allowed: see man(7), man(1) +.TH SKIPPY SECTION "八月 22, 2004" +.\" Please adjust this date whenever revising the manpage. +.\" +.\" Some roff macros, for reference: +.\" .nh disable hyphenation +.\" .hy enable hyphenation +.\" .ad l left justify +.\" .ad b justify to both left and right margins +.\" .nf disable filling +.\" .fi enable filling +.\" .br insert line break +.\" .sp insert n+1 empty lines +.\" for manpage-specific macros, see man(7) +.SH NAME +skippy \- program to do something +.SH SYNOPSIS +.B skippy +.RI [ options ] " files" ... +.br +.B bar +.RI [ options ] " files" ... +.SH DESCRIPTION +This manual page documents briefly the +.B skippy +and +.B bar +commands. +This manual page was written for the Debian distribution +because the original program does not have a manual page. +Instead, it has documentation in the GNU Info format; see below. +.PP +.\" TeX users may be more comfortable with the \fB\fP and +.\" \fI\fP escape sequences to invode bold face and italics, +.\" respectively. +\fBskippy\fP is a program that... +.SH OPTIONS +These programs follow the usual GNU command line syntax, with long +options starting with two dashes (`-'). +A summary of options is included below. +For a complete description, see the Info files. +.TP +.B \-h, \-\-help +Show summary of options. +.TP +.B \-v, \-\-version +Show version of program. +.SH SEE ALSO +.BR bar (1), +.BR baz (1). +.br +The programs are documented fully by +.IR "The Rise and Fall of a Fooish Bar" , +available via the Info system. +.SH AUTHOR +This manual page was written by Geoffrey LEE , +for the Debian project (but may be used by others). --- skippy-0.5.0.orig/debian/manpage.sgml.ex +++ skippy-0.5.0/debian/manpage.sgml.ex @@ -0,0 +1,156 @@ + manpage.1'. You may view + the manual page with: `docbook-to-man manpage.sgml | nroff -man | + less'. A typical entry in a Makefile or Makefile.am is: + +manpage.1: manpage.sgml + docbook-to-man $< > $@ + + + The docbook-to-man binary is found in the docbook-to-man package. + Please remember that if you create the nroff version in one of the + debian/rules file targets (such as build), you will need to include + docbook-to-man in your Build-Depends control field. + + --> + + + FIRSTNAME"> + SURNAME"> + + 八月 22, 2004"> + + SECTION"> + glee@anakin.wychk.org"> + + SKIPPY"> + + + Debian"> + GNU"> + GPL"> +]> + + + +
+ &dhemail; +
+ + &dhfirstname; + &dhsurname; + + + 2003 + &dhusername; + + &dhdate; + + + &dhucpackage; + + &dhsection; + + + &dhpackage; + + program to do something + + + + &dhpackage; + + + + + + + + DESCRIPTION + + This manual page documents briefly the + &dhpackage; and bar + commands. + + This manual page was written for the &debian; distribution + because the original program does not have a manual page. + Instead, it has documentation in the &gnu; + Info format; see below. + + &dhpackage; is a program that... + + + + OPTIONS + + These programs follow the usual &gnu; command line syntax, + with long options starting with two dashes (`-'). A summary of + options is included below. For a complete description, see the + Info files. + + + + + + + + Show summary of options. + + + + + + + + Show version of program. + + + + + + SEE ALSO + + bar (1), baz (1). + + The programs are documented fully by The Rise and + Fall of a Fooish Bar available via the + Info system. + + + AUTHOR + + This manual page was written by &dhusername; &dhemail; for + the &debian; system (but may be used by others). Permission is + granted to copy, distribute and/or modify this document under + the terms of the &gnu; General Public License, Version 2 any + later version published by the Free Software Foundation. + + + On Debian systems, the complete text of the GNU General Public + License can be found in /usr/share/common-licenses/GPL. + + + + + + + + --- skippy-0.5.0.orig/debian/manpage.xml.ex +++ skippy-0.5.0/debian/manpage.xml.ex @@ -0,0 +1,148 @@ + +.
will be generated. You may view the +manual page with: nroff -man .
| less'. A +typical entry in a Makefile or Makefile.am is: + +DB2MAN=/usr/share/sgml/docbook/stylesheet/xsl/nwalsh/\ +manpages/docbook.xsl +XP=xsltproc -''-nonet + +manpage.1: manpage.dbk + $(XP) $(DB2MAN) $< + +The xsltproc binary is found in the xsltproc package. The +XSL files are in docbook-xsl. Please remember that if you +create the nroff version in one of the debian/rules file +targets (such as build), you will need to include xsltproc +and docbook-xsl in your Build-Depends control field. + +--> + + + FIRSTNAME"> + SURNAME"> + + 八月 22, 2004"> + + SECTION"> + glee@anakin.wychk.org"> + + SKIPPY"> + + + Debian"> + GNU"> + GPL"> +]> + + + +
+ &dhemail; +
+ + &dhfirstname; + &dhsurname; + + + 2003 + &dhusername; + + &dhdate; + + + &dhucpackage; + + &dhsection; + + + &dhpackage; + + program to do something + + + + &dhpackage; + + + + + + + + DESCRIPTION + + This manual page documents briefly the + &dhpackage; and bar + commands. + + This manual page was written for the &debian; distribution + because the original program does not have a manual page. + Instead, it has documentation in the &gnu; + Info format; see below. + + &dhpackage; is a program that... + + + + OPTIONS + + These programs follow the usual &gnu; command line syntax, + with long options starting with two dashes (`-'). A summary of + options is included below. For a complete description, see the + Info files. + + + + + + + + Show summary of options. + + + + + + + + Show version of program. + + + + + + SEE ALSO + + bar (1), baz (1). + + The programs are documented fully by The Rise and + Fall of a Fooish Bar available via the + Info system. + + + AUTHOR + + This manual page was written by &dhusername; &dhemail; for + the &debian; system (but may be used by others). Permission is + granted to copy, distribute and/or modify this document under + the terms of the &gnu; General Public License, Version 2 any + later version published by the Free Software Foundation. + + + On Debian systems, the complete text of the GNU General Public + License can be found in /usr/share/common-licenses/GPL. + + + + + --- skippy-0.5.0.orig/debian/menu.ex +++ skippy-0.5.0/debian/menu.ex @@ -0,0 +1,2 @@ +?package(skippy):needs=X11|text|vc|wm section=Apps/see-menu-manual\ + title="skippy" command="/usr/bin/skippy" --- skippy-0.5.0.orig/debian/skippy.doc-base.EX +++ skippy-0.5.0/debian/skippy.doc-base.EX @@ -0,0 +1,22 @@ +Document: skippy +Title: Debian skippy Manual +Author: +Abstract: This manual describes what skippy is + and how it can be used to + manage online manuals on Debian systems. +Section: unknown + +Format: debiandoc-sgml +Files: /usr/share/doc/skippy/skippy.sgml.gz + +Format: postscript +Files: /usr/share/doc/skippy/skippy.ps.gz + +Format: text +Files: /usr/share/doc/skippy/skippy.text.gz + +Format: HTML +Index: /usr/share/doc/skippy/html/index.html +Files: /usr/share/doc/skippy/html/*.html + + --- skippy-0.5.0.orig/debian/postinst.ex +++ skippy-0.5.0/debian/postinst.ex @@ -0,0 +1,42 @@ +#! /bin/sh +# postinst script for skippy +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `configure' +# * `abort-upgrade' +# * `abort-remove' `in-favour' +# +# * `abort-deconfigure' `in-favour' +# `removing' +# +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package +# + +case "$1" in + configure) + + ;; + + abort-upgrade|abort-remove|abort-deconfigure) + + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- skippy-0.5.0.orig/debian/postrm.ex +++ skippy-0.5.0/debian/postrm.ex @@ -0,0 +1,38 @@ +#! /bin/sh +# postrm script for skippy +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `remove' +# * `purge' +# * `upgrade' +# * `failed-upgrade' +# * `abort-install' +# * `abort-install' +# * `abort-upgrade' +# * `disappear' overwrit>r> +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + + + ;; + + *) + echo "postrm called with unknown argument \`$1'" >&2 + exit 1 + +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 --- skippy-0.5.0.orig/debian/preinst.ex +++ skippy-0.5.0/debian/preinst.ex @@ -0,0 +1,44 @@ +#! /bin/sh +# preinst script for skippy +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `install' +# * `install' +# * `upgrade' +# * `abort-upgrade' +# +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + install|upgrade) +# if [ "$1" = "upgrade" ] +# then +# start-stop-daemon --stop --quiet --oknodo \ +# --pidfile /var/run/skippy.pid \ +# --exec /usr/sbin/skippy 2>/dev/null || true +# fi + ;; + + abort-upgrade) + ;; + + *) + echo "preinst called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- skippy-0.5.0.orig/debian/prerm.ex +++ skippy-0.5.0/debian/prerm.ex @@ -0,0 +1,39 @@ +#! /bin/sh +# prerm script for skippy +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `remove' +# * `upgrade' +# * `failed-upgrade' +# * `remove' `in-favour' +# * `deconfigure' `in-favour' +# `removing' +# +# for details, see http://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + remove|upgrade|deconfigure) +# install-info --quiet --remove /usr/info/skippy.info.gz + ;; + failed-upgrade) + ;; + *) + echo "prerm called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 + + --- skippy-0.5.0.orig/debian/README.Debian +++ skippy-0.5.0/debian/README.Debian @@ -0,0 +1,9 @@ +skippy for Debian +----------------- + +skippy requires a .skippyrc in your home directory. An example has been +included in this package. In particular, if you use window managers like +Window Maker which is known to use the F11 (the default skippy hotkey) then +you would need to change it. + + -- Geoffrey LEE , Sun, 22 Aug 2004 12:17:58 +0800 --- skippy-0.5.0.orig/debian/copyright +++ skippy-0.5.0/debian/copyright @@ -0,0 +1,14 @@ +This package was debianized by Geoffrey LEE on +Sun, 22 Aug 2004 12:17:58 +0800. + +It was downloaded from http://thegraveyard.org/files/skippy-0.5.0.tar.bz2 + +Upstream Author(s): Hyriand + +Copyright: + +This program is copyrighted under the GNU General Public License. On +a Debian GNU/Linux system, you can find a copy of the license at +/usr/share/common-licenses/GPL. + + --- skippy-0.5.0.orig/debian/control +++ skippy-0.5.0/debian/control @@ -0,0 +1,20 @@ +Source: skippy +Section: x11 +Priority: optional +Maintainer: Geoffrey LEE +Build-Depends: debhelper (>= 4.0.0), libimlib2-dev +Standards-Version: 3.6.0 + +Package: skippy +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: program that provides expose-like features in X11 + Skippy is a program that provides expose-like features found on the Mac + OS X operating system. + . + If you work with many windows, your desktop may begin to get cluttered. You + can use skippy to quickly and conveniently find the right window that you + are looking for. + . + To use skippy, you need a GNOME or NetWM compliant window manager. + --- skippy-0.5.0.orig/debian/rules +++ skippy-0.5.0/debian/rules @@ -0,0 +1,98 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# GNU copyright 1997 to 1999 by Joey Hess. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + + + + +CFLAGS = -Wall -g + +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif +ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) + INSTALL_PROGRAM += -s +endif + +configure: configure-stamp +configure-stamp: + dh_testdir + # Add here commands to configure the package. + + touch configure-stamp + + +build: build-stamp + +build-stamp: configure-stamp + dh_testdir + + # Add here commands to compile the package. + $(MAKE) + #/usr/bin/docbook-to-man debian/skippy.sgml > skippy.1 + + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp configure-stamp + + # Add here commands to clean up after the build process. + -$(MAKE) clean + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + # Add here commands to install the package into debian/skippy. + $(MAKE) install DESTDIR=$(CURDIR)/debian/skippy PREFIX=/usr + + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_installchangelogs CHANGELOG + dh_installdocs skippyrc-default + dh_installexamples +# dh_install +# dh_installmenu +# dh_installdebconf +# dh_installlogrotate +# dh_installemacsen +# dh_installpam +# dh_installmime +# dh_installinit +# dh_installcron +# dh_installinfo + dh_installman + dh_link + dh_strip + dh_compress + dh_fixperms +# dh_perl +# dh_python +# dh_makeshlibs + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install configure --- skippy-0.5.0.orig/debian/watch.ex +++ skippy-0.5.0/debian/watch.ex @@ -0,0 +1,6 @@ +# Example watch control file for uscan +# Rename this file to "watch" and then you can run the "uscan" command +# to check for upstream updates and more. +# Site Directory Pattern Version Script +version=2 +sunsite.unc.edu /pub/Linux/Incoming skippy-(.*)\.tar\.gz debian uupdate --- skippy-0.5.0.orig/debian/skippy-default.ex +++ skippy-0.5.0/debian/skippy-default.ex @@ -0,0 +1,10 @@ +# Defaults for skippy initscript +# sourced by /etc/init.d/skippy +# installed at /etc/default/skippy by the maintainer scripts + +# +# This is a POSIX shell fragment +# + +# Additional options that are passed to the Daemon. +DAEMON_OPTS=""